Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

The effects of autophagy on vascular endothelial cells induced by airborne PM2.5

The purpose of this study was to examine the direct toxicity of PM2.5 collected from Beijing on human umbilical vein endothelial cells(HUVEC). A Cell Counting Kit 8(CCK8) assay demonstrated that PM2.5 exposure decreased the proliferation of HUVECs in a dosedependent manner. We also found that PM2.5 exposure induced autophagy in HUVECs, as evidenced by:(1) an increased number of double-membrane vesicles;(2) enhanced conversion and punctuation of the microtubule-associated protein light chain 3(LC3); and(3) decreased levels of the selective autophagy substrate p62 in a time-dependent manner.Furthermore, promoting autophagy in PM2.5-exposed HUVECs with rapamycin increased the cell survival rate, whereas inhibiting autophagy via 3-methyladenine significantly decreased cell survival. These results demonstrate that PM2.5 exposure can induce cytotoxicity and autophagy in HUVECs and that autophagy play a protective role against PM2.5-induced cytotoxicity. The findings of the present study imply a direct toxic effect of PM2.5 on HUVECs and provide novel insight into the mechanism of cardiovascular diseases caused by PM2.5 exposure.     

海洋环境低水位加速腐蚀研究进展

以海洋环境中一个非常重要的局部腐蚀形式——低水位加速腐蚀(ALWC)为对象,自其检测、发生原因、防护三个方面就国内外的文献报告进行综述分析。在检测方面,首先介绍了常用的宏观观察这一被动形式,并突出其特征,然后介绍了利用海水中可溶性无机氮含量作为ALWC发生概率预测这一主动形式,分析其优势与不足。在发生原因方面,在对将ALWC认定为一种典型的微生物腐蚀(MIC)形式的认知过程进行介绍之后,重点分析了微生物对ALWC作用机制不清晰的原因,并建议在后续研究中突出动态演变过程,结合高通量测序等分子生物学技术,确定在不同的阶段影响ALWC的关键微生物,且进一步在大气-海水体系下研究典型菌株及其协同作用的影响,提出微生物对ALWC的作用机制。在防护方面,根据新建和已建钢结构设施分别对传统和针对ALWC所具有的MIC与局部腐蚀特性的新型高效防护方法进行了介绍,并分析了防护方法的优缺点。     

一种硫离子响应杀菌材料的制备及应用研究

目的制备硫离子响应杀菌材料,研究它在不同浓度铜离子条件下的封装效果,以及在不同浓度硫离子条件下的释放行为。方法选择埃洛石纳米管为载体并用透射电镜进行表征、采用真空负载的方式,将甲硝唑和苯骈三氮唑(BTA)分步填充到埃洛石纳米管内部,使用紫外分光光度法测试不同浓度铜离子对纳米管中甲硝唑的封堵效果,以及材料在不同浓度硫离子条件下的释放情况。结果实验中通过调整铜离子浓度发现,铜离子浓度越大对甲硝唑的封堵效果越好,当铜离子浓度达到160 mmol/L时,对甲硝唑的封堵效果最好。杀菌材料在外界硫离子达到0.1mmol/L后,甲硝唑的释放浓度迅速提高,进一步提高硫离子浓度,释放情况改变不明显。结论铜离子浓度达到160 mmol/L时,材料的封装效果是最好的。材料能够对硫离子实现响应释放,且对应的临界浓度为0.1 mmol/L。     

大型工业企业污染物防治的会计成本控制策略研究

为了降低大型工业企业污染物防治的成本,提出会计成本控制策略研究。基于自然对数模型,对企业污染物防治的会计成本控制模型进行构建。采用最小二乘回归分析法,分析会计成本控制模型的约束变量,设计能源消费结构,将污染排放水平等参量作为结构的解释变量,对模型的回归系数进行计算,完成会计成本控制模型的构建。引入面板数据随机分析法,分析大型工业企业污染防治的弹性关系,通过会计成本控制模型,实现会计成本的最优控制。     

Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

4类噪声标准适用区最佳监测时间研究

以1年的实测数据为分析样本,分别采用误差理论分析及数理统计分析方法,在保证一定精确度前提下确定出反映4类标准适用区噪声水平的最佳监测时间。     

Modeling the spatial pattern of farmland using GIS and multiple logistic regression: a case study of Maotiao River Basin, Guizhou Province, China

Land use change is an important topic in the field of global environmental change and sustainable development. Land use change modeling has attracted substantial attention because it helps researchers understand the mechanisms of land use change and assists regulatory bodies in formulating relevant policies. Maotiao River Basin is located in the province of Guizhou, China, which has a developed agricultural industry in the karst mountain areas. This paper selected biophysical and social–economic factors as independent variables, and constructed a multiple logistic regression of farmland spatial distribution probability by random sampling. Then, by using GIS technology and integrating the 2000 data, this study predicted the farmland spatial pattern. When the predicted map was compared with the actual farmland map for 2000, we noted that 71% of the simulation is in accordance with the 2000 farmland pattern. The result satisfactorily proves the reasonability and applicability of our model.     

Performance evaluation of a sorbent tube sampling method using short path thermal desorption for volatile organic compounds

Air sampling, using sorbents, thermal desorption and gas chromatography, is a versatile method for identifying and quantifying trace levels of volatile organic compounds (VOCs). Thermal desorption can provide high sensitivity, appropropriate choices of sorbents and method parameters can accommodate a wide range of compounds and high humidity, and automated short-path systems can minimize artifacts, losses and carry-over effects. This study evaluates the performance of a short-path thermal desorption method for 77 VOCs using laboratory and field tests and a dual sorbent system (Tenax GR, Carbosieve SIII). Laboratory tests showed that the method requirements for ambient air sampling were easily achieved for most compounds, e.g., using the average and standard deviation across target compounds, blank emissions were < or = 0.3 ng per sorbent tube for all target compounds except benzene, toluene and phenol; the method detection limit was 0.05 +/- 0.08 ppb, reproducibility was 12 +/- 6%, linearity, as the relative standard deviation of relative response factors, was 16 +/- 9%, desorption efficiency was 99 +/- 28%, samples stored for 1-6 weeks had recoveries of 87 +/- 9%, and high humidity samples had recoveries of 102 +/- 12%. Due to sorbent, column and detector characteristics, performance was somewhat poorer for phenol groups, ketones, and nitrogen containing compounds. The laboratory results were confirmed in an analysis of replicate samples collected in two field studies that sampled ambient air along roadways and indoor air in a large office building. Replicates collected under field conditions demonstrated good agreement except for very low concentrations or large (> 41 volume) samples of high humidity air. Overall, the method provides excellent performance and satisfactory throughput for many applications.     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。